EN856 4SP – High Pressure, 4 Wire Spiral Hose

Short Description:

Standard: Meet EN856 4SP, SAE 100R15
Application: Petroleum base hydraulic fluids and lubricating oils.
Inner Tube: Oil Resistant Synthetic rubber.
Reinforcement: Four braid steel wire.
Out Cover: Oil & Ozone Resistant Synthetic rubber.
Temperature Range: -40°F to +249°F (-40°C to +121°C).

Send email to us

Product Detail

Product Tags

Part No.	Hose I.D.		Hose O.D.		Max Working Pressure		Min Burst Pressure		Minium Bending Radius		Weight of Hose
DHD-4SP	inch	mm	inch	mm	psi	Mpa	psi	Mpa	inch	mm	lbs/ft	g/m
-10	3/8	10.0	0.84	21.3	6500	44.5	26000	178.0	5.12	130	0.48	765
-12	1/2	13.0	0.96	24.3	6000	41.5	24000	166.0	5.51	140	0.63	925
-16	5/8	15.9	1.10	28.0	5100	38.0	22000	152.0	6.30	160	0.75	1115
-19	3/4	19.0	1.25	31.8	5100	38.0	22000	152.0	7.87	200	0.98	1450
-25	1	25.4	1.55	39.4	4000	32.0	18600	128.0	9.06	230	1.32	1945

4-wire construction hose comes with medium operating pressure in all sizes and is recommended for use in extreme-duty applications on construction equipment, oil and gas rigs, mining equipment, and other high pressure applications.

Common applications

Hydraulic system service with petroleum & water based fluids, for general industrial service
Hydraulic system with petroleum based fluids for low temperature applications

Features

1- Matched hose and fittings tested and approved, high quality and safety. with longest service life
2- tough cover and greater abrasion resistance.
3- complete No-skive fitting technology across the full range of medium pressure hose providing simpler,quicker and safer hose assembly

4 wire hose fittings
interchangeable with parker 70 series