Here are some precautions for the storing hydarulic hose:
1.The storage location of the upper and lower hydraulic hose should be kept clean and ventilated. The relative humidity should be less than 80%, and the humidity in the storage location should be maintained between -15 ° C and 40 ° C. Hydraulic hose should be protected from direct sunlight and water.
2.If hydraulic hose need to be temporarily stored in the open air, the site must be flat, the hose should be placed flat and covered, and heavy objects should not be stacked. At the same time, they should not come into contact with heat sources.
3.When storing hydraulic hose, they should be placed according to different specifications and should not be mixed or hung.
4.Both ends of the hydraulic hose must be tightly sealed to prevent debris from entering the hydraulic hose.
5.Store in a relaxed state as much as possible. Generally, hydraulic hose with an inner diameter of less than 76mm can be stored in coils
6.To prevent hydraulic hose from being compressed and deformed during storage, the stacking height should not be too high, and the height should not exceed 1.5mm; And hydraulic hose often need to be “knocked” during storage, at least once a quarter.
7.It should not come into contact with acids, alkalis, oils, organic solvents, or other corrosive liquids or gases, and should be separated from heat sources by 1 meter.
8.It is strictly prohibited to stack heavy objects on the pipe body to prevent external pressure and damage.
9.The storage period of hydraulic hose should not exceed 2 years, and they should be used before storage to avoid affecting the quality of hydraulic pipes due to prolonged storage.
If you have any questions, welcome to Hainar to inquiry,we will provide you with high-quality service and good quality products.
Post time: Oct-17-2023